Cumaru Stairs Friday Harbor,WA San Juan
Hoffmann Hardwood Floors is able to handle stair sanding and finishing as well as installation. In this picture we have sanded all parts, stained the desired color and prefinished with 3 coats of clear with a ceramic coat abrasion resistant layer. All off site to minimize impact of work performed in the home.
Picture shows heated drying room!
Read More
Scratched Prefinished Flooring is Refinished Bellingham,WA
What do you do when the factory finish on pre-finished flooring wears out?……….
Read MoreHardwood Floor Sanders for Refinishing Whatcom
The Lagler Hummel belt sander and the Lagler TRIO are real sanders used in the wood floor trade!
Read More
Subfloor and Hardwood Floor Install Bellingham,WA
- Sand all wood 2×4 sleepers to rid of paint and pollutants to ready for gluedown of plywood
- Screw down all sleepers every 6″ to ensure solid base (note screw seen in this picture is previous work by others)
- verify flatness of substrate plane and plane/sand to remove highs
- each plywood sheet is cut and 2 screw-“loose laid” for dry fit.
- Any issues get an “x” for fix. Once fixed OK approves next step.
- apply 2 beads of glue per 3.5″ width for guaranteed bond
- screw down all sheets every 6″ and within 1″ of sheet edge
- leave approx. 1/8″ gap for expansion
Hardwood Floor Needs Expansion Gap at Walls Bellingham WA
I was hired to sand and finish a new wood floor that was installed by another contractor. Upon arrival, I had some concerns……..
Read More
